User Inputs
===========

.. todo::

  Should we keep the user inputs listed out here? They will need to be updated.

**About This House**

1. Address
2. Assessment Date
3. Year Built
4. Number of Bedrooms
5. Stories Above Grade
6. Floor to Ceiling Height
7. House Orientation
8. Blower Door Test Reading (Y/N) (If so, CFM50 reading)
9. Professional Whole Home Air Sealing (Y/N)

**Roof, Attic, Foundation**

10. Attic Area
11. Roof Type and Finish (may describe 2)
12. Roof Insulation R-value
13. Roof Color
14. Attic Type
15. Attic Insulation R-value
16. Foundation Type (may describe 2)
17. Insulation R-value Above Basement or Crawlspace
18. Foundation Insulation R-value

**Walls**

19. Townhouse or Duplex (Y/N) (If Yes, Relative Position (L, M, R))
20. Wall Construction (may describe 4)
21. Exterior Cladding
22. Cavity R-value

**Windows and Skylights**

23. Skylights (Y/N) (If Yes, same info as follows for windows)
24. Window Area for Front, Back, Left, Right
25. Solar Shade Screen (Y/N)
26. # Panes
27. Frame Type
28. Glazing Type, or U-Factor and SHGC

**Heating, Cooling and Hot Water**

29. Heating System Type (may describe 2)
30. Heating System Efficiency (preferred) or Manufacture Date
31. Cooling System Type (may describe 2)
32. Cooling System Efficiency (preferred) or Manufacture Date
33. Duct Location (may describe 3)
34. % Ducts in Location
35. Ducts Sealed (Y/N)
36. Ducts Insulated (Y/N)
37. Water Heater Type
38. Water Heater Efficiency (preferred) or Manufacture Date

**Photovoltaic System**

39. Year Installed
40. Orientation
41. System Capacity (kW) or # of Panels