User InputsΒΆ

Todo

Should we keep the user inputs listed out here? They will need to be updated.

About This House

  1. Address

  2. Assessment Date

  3. Year Built

  4. Number of Bedrooms

  5. Stories Above Grade

  6. Floor to Ceiling Height

  7. House Orientation

  8. Blower Door Test Reading (Y/N) (If so, CFM50 reading)

  9. Professional Whole Home Air Sealing (Y/N)

Roof, Attic, Foundation

  1. Attic Area

  2. Roof Type and Finish (may describe 2)

  3. Roof Insulation R-value

  4. Roof Color

  5. Attic Type

  6. Attic Insulation R-value

  7. Foundation Type (may describe 2)

  8. Insulation R-value Above Basement or Crawlspace

  9. Foundation Insulation R-value

Walls

  1. Townhouse or Duplex (Y/N) (If Yes, Relative Position (L, M, R))

  2. Wall Construction (may describe 4)

  3. Exterior Cladding

  4. Cavity R-value

Windows and Skylights

  1. Skylights (Y/N) (If Yes, same info as follows for windows)

  2. Window Area for Front, Back, Left, Right

  3. Solar Shade Screen (Y/N)

  4. # Panes

  5. Frame Type

  6. Glazing Type, or U-Factor and SHGC

Heating, Cooling and Hot Water

  1. Heating System Type (may describe 2)

  2. Heating System Efficiency (preferred) or Manufacture Date

  3. Cooling System Type (may describe 2)

  4. Cooling System Efficiency (preferred) or Manufacture Date

  5. Duct Location (may describe 3)

  6. % Ducts in Location

  7. Ducts Sealed (Y/N)

  8. Ducts Insulated (Y/N)

  9. Water Heater Type

  10. Water Heater Efficiency (preferred) or Manufacture Date

Photovoltaic System

  1. Year Installed

  2. Orientation

  3. System Capacity (kW) or # of Panels